The product is designed to solve the conditions of building factories on the flat ground, in the equipment configuration, the self-leveling height of ore pulp is not enough, and add to small difference in height, at the bottom of the slurry under the centrifugal impeller suction action into the mixing tank, achieve the purpose of lifting. The application scope of the lifting type stirring tank is very wide, it is mainly caused by the phenomenon of pipeline loss and difficulty in flowing in meta...

The utility model is suitable for the mixing of pulp and medicament with the concentration of not more than 30% and the ore density of not more than 3.5, and the particle size is not more than 1mm, Compared with RJ agitator, XB agitator has bigger motor power and stirring force, with different circular tube structure,setting an overflow port and pulp lifting pipe, having better stirring effect.

Agitation Tank is mainly used to mix pulp before flotation in the beneficiation process. It can mix drug and pulp intensively. Agitator is suitable to mix pulp with density smaller than 30 % (weight ratio) and size smaller than 1mm. V-belt of motor drives impeller to mix drug and pulp completely. This machine can increase reaction time and strengthen reaction quality of the drug.

The machine is used in the mixing of high concentration pulp, such as stirring after concentration, sand and pulp mixing, stirring concentration reached 75%, there are two opposite spiral impeller, impeller has strong wear resistance and so on. 【Introduction】:Agitation equipment which forces the slurry to take up and down circulation【Improvement】:Umbrella shaped impeller presses the slurry, so that the slurry takes up and down circulation along draft tube,which makes reagents and slurry mi...