Waste incineration rotary kilnProduct introduction: Rotary incineration kiln is widely used incineration equipment in the field of industrial waste treatment, and has a relatively high market share in the field of industrial waste incineration. As a specific field of incineration of hazardous waste, rotary incinerators can deal with complex industrial waste, medical treatment, etc. Garbage has many advantages such as wide adaptability, stable and reliable operation, convenient management and operation, and simple equipment maintenance, so it is widely used in the field of hazardous waste incineration. Incineration is a relatively reliable and effective means to realize the harmlessness, reduction and recycling of garbage. Capacity: 30-150t/d Scope of application: industrial waste, medical waste, construction waste, etc.

Sludge ceramsite rotary kiln

Product introduction: The company can produce acidification kiln coolers with a diameter of Φ1-Φ5.5m, which are used for cooling materials after acidification and roasting of lithium concentrate by new materials for lithium batteries. Capacity: 5-55t/d Model: Ø1-Ø5.5m Motor power: 11-450KW Scope of application: It is suitable for the cooling of materials after acidification and roasting of lithium concentrate by new lithium battery materials

Zinc oxide rotary kiln is one of the common methods for processing zinc-containing intermediate materials, and it is also a roasting equipment for calcining zinc. XKJ GROUP zinc oxide rotary kiln is a rotary kiln specially designed for the production of zinc oxide, because zinc oxide is a fine powder, so We have to make a specific set of rotary kilns for zinc oxide, so that's what we call zinc oxide rotary kilns now.

Magnesium metal rotary kiln is a special rotary kiln developed according to the calcination characteristics of dolomite and the process requirements of Pidgeon method for smelting magnesium. It is the key equipment of the dolomite calcination system. The calcined white produced by the rotary kiln has stable and uniform quality and high activity. , low loss on ignition, fully meet the technical requirements of Pidgeon method for smelting magnesium, so that the extraction rate of magnesium and the utilization rate of silicon are relatively high, which reduces the production cost of metal magnesium. It is an ideal equipment for calcining dolomite in the magnesium industry.

Related cases of Lepidolite Rotary Kiln Product introduction of Lepidolite Rotary KilnThe company can produce kiln types with a diameter of 1~5.5m, which are widely used in metallurgy, building materials, chemicals, refractory materials, ceramsite, papermaking, new materials, new energy and other industries. The support of this type of kiln is divided into two types: rolling and sliding. The transmission can adopt DC or AC frequency conversion speed regulation, and it is equipped with various f...

Product introduction of spodumene rotary kilnThe company can produce kiln types with a diameter of 1~5.5m, and can widely identify industries such as metallurgy, building materials, chemicals, refractory materials, ceramsite, papermaking, new materials, and new energy. There are two types of sliding, the transmission can be adjusted by outdoor or AC frequency conversion, and there are various types of sealing to adapt to different working conditions. The company can design various non-standard k...

Qualified activated carbon materials are stored in the silo, lifted by the hoist and transported into the top silo of the preheater. In the silo on the top of the preheater, the feeding amount is controlled by two upper and lower material level gauges, and then the material is evenly distributed to each chamber of the preheater through the feeding pipe. The material is heated to about 900°C by 1150°C kiln flue gas in the preheater, about 30% of which is decomposed, and pushed into the activated carbon rotary kiln by a hydraulic push rod, and the material is sintered and decomposed into CaO and CO2 in the activated carbon rotary kiln. The limestone generated after decomposition enters the cooler, where it is cooled by the blown cold air to below 100°C and discharged, and the hot air at 600°C after heat exchange enters the kiln and is mixed with gas for combustion. The exhaust gas is mixed with cold air, enters the bag filter through the induced draft fan, and then enters the chimney thr

Ceramsite sand, also known as fracturing proppant, is a ceramic particle product with high fracturing strength. It is mainly used for downhole support in oil and gas fields to increase the output of oil, natural gas, coalbed methane, and shale gas. It is an environmentally friendly product . This product is made of high-quality bauxite and other raw materials by sintering. It is a substitute for medium and low-strength proppants such as natural quartz sand, glass balls, and metal balls. It has a good effect on increasing oil and gas production.

Hazardous waste rotary kiln incinerator is composed of kiln shell, transmission device, support device, retaining wheel device, kiln head sealing device, kiln tail sealing device, kiln hood, etc., and is widely used for its super adaptability to materials For the incineration treatment of hazardous waste, cooperate with the front-end material crushing and conveying (SMP) system to crush, mix and mix all kinds of solid and liquid hazardous waste, and transport them in a sealed manner. Through high-temperature incineration, the organic components in the material are fully oxidized and decomposed at high temperature. The exhaust system is equipped with targeted treatment devices to achieve an emission state that fully meets the requirements of the national standard.

Kaolin rotary kiln is also called kaolin calcining kiln. The advantages of this equipment can be seen from the name of the equipment. It is a specialized equipment developed based on the characteristics of kaolin. In the actual application process, it has large production capacity and work efficiency. A series of advantages such as high performance, strong operation stability, environmental protection and no noise, it is a building material equipment with more functions and excellent performance

Dolomite is a kind of silicate material, most of which are white, and its impurity content is very low. It plays a very important role in mining, construction, building materials, metallurgy and other fields.

Rotary kiln is rotary calcining kiln and one of building material equipments. According to dealing with different materials, there are cement kiln, matallurgy chemical kiln and lime kiln.Rotary kiln is the key equipment of cement clinker in dry-process and wet-process production line. Metallurgy chemical kiln is mainly used in iron ore magnetic calcination, silicon thermal refining magnesium, chromium nickel ore calcination, refractory calcination and active lime and calcined dolomite for steel ...

It is mainly used in lime processing production line, cement production line and calcium carbonate processing production line, etc. It can also be used in building materials, chemical industry, environmental protection and other industries.