Henan Xingyang Mining Machinery Manufactory(XKJ GROUP). creates a cost-effective activated carbon rotary kiln for you, with reliable operation and long service life. Welcome to consult. The price of activated carbon rotary kiln: Tel: +86-371-5675 1333 WhatsApp: 0086-138 3714 0277

Performance parameters: Φ2.5×40-Φ6.0×95
Production capacity: 180-10000t/d
Application fields: in building materials, refractory materials, environmental protection industry
Applicable materials: It can calcinate activated carbon, lime and calcium carbonate and other materials

Performance advantages of activated carbon rotary kiln
1. Activated carbon rotary kiln has the characteristics of environmental protection, energy saving, mechanization and high degree of automation (PLC bus control);
2. The activated carbon rotary kiln adopts modern new burner technology, which can make full use of cheap energy, especially the use of combustible gas that pollutes the environment and is discharged in large quantities as part of the energy, turning waste into treasure.
3. The raw materials and fuels of the activated carbon rotary kiln production line have strong adaptability, easy maintenance, and low energy consumption, which are regarded as the preferred kiln type by this industry.
4. The equipment adopts advanced kiln head and kiln tail sealing technology and devices, which have the remarkable characteristics of stable operation and high output.

Working principle of activated carbon rotary kiln
Qualified activated carbon materials are stored in the silo, lifted by the hoist and transported into the top silo of the preheater. In the silo on the top of the preheater, the feeding amount is controlled by two upper and lower material level gauges, and then the material is evenly distributed to each chamber of the preheater through the feeding pipe. The material is heated to about 900°C by 1150°C kiln flue gas in the preheater, about 30% of which is decomposed, and pushed into the activated carbon rotary kiln by a hydraulic push rod, and the material is sintered and decomposed into CaO and CO2 in the activated carbon rotary kiln. The limestone generated after decomposition enters the cooler, where it is cooled by the blown cold air to below 100°C and discharged, and the hot air at 600°C after heat exchange enters the kiln and is mixed with gas for combustion. The exhaust gas is mixed with cold air, enters the bag filter through the induced draft fan, and then enters the chimney through the exhaust fan.