【Gold Tailings Reprocessing Technology Process Introduction】
In general, XKJ GROUP extracts gold from old tailings by all-slime cyanidation and CIL technology. The gold tailings after cyanidation are dealt with tailings dry stacking method. It is a technology that recycles the filtrate to realize the water resources recycling in processing plants with pressure filtration process, and get rid of most cyanide in the tailings. For other elements in the gold tailings, XKJ GROUP applies magnetic separation, flotation and other methods to deal with.
【Gold Tailings Reprocessing Technology Application】
XKJ GROUP gold tailings reprocessing technology is mainly from environment protection and full utilization of resource, reprocessing the valuable gold tailings. According to the different characteristics of gold tailings, the reasonable gold tailings reprocessing technology is designed to make the tailings give full play to the value.
[Gold Tailings Reprocessing Technology Process Introduction]
There are mainly several methods of gold tailings reprocessing:
1. The iron recovery from gold tailings can adopts common processing technology such as gravity separation, magnetic separation, flotation, roasting magnetic separation and their combined processing technology. There are only four kinds of valuable minerals recovering by magnetic - gravity separation combined technology: magnetite, hematite, ilmenite, and garnet. Among them, the garnet is mainly iron aluminum garnet.
2. Gold and silver recovery from gold tailings by CIP. All-slime cyanidation carbon pulp gold extraction technology can recover the gold and silver from the old gold tailings. Xinhai usually adopts the all-slime cyanidation + CIP in the gold extraction from old tailings. The gold tailings after cyanidation are treated by dry stacking. That is a technology that recycles the filtrate to realize the water resources recycling in processing plants with pressure filtration process, and get rid of most cyanide in the tailings.
3. Other minerals recovery from gold tailings. The metal sulfide is mainly pyrite, and some are copper pyrite and bornite. The gold mineral is mainly natural gold, and some are electrum. The metal oxides are mainly speculative and siderite. The gangue minerals are mainly quartz, sericite, etc. The processing technology uses one-stage grinding, preferential flotation process. The gold and copper concentrate product can be recovered once.
In general, the gold recovery method of gold tailings is mainly the all-slime cyanidation CIP method. It is the recovery of residual gold particles from tailings by using the property of gold soluble in cyanide. The gold recovery for large capacity and low-grade gold tailings is common heap leaching.
How to operate the no-load test run of the ball mill?2024.02.26
How to stabilize the output of ball mill2024.02.26
How to choose mineral processing equipment that suits you? Comprehensive analysis of the selection and use techniques of mineral processing equipment2024.02.23
Ore dressing recovery rate2024.02.23