Home / Products / Drying & Cooling Equipment / Sand Dryer /

Single drum dryer

Single drum dryer
Processing capacity:
5-80t/h
Applicable materials:
Used in coal slime, raw coal, flotation cleaned coal, mixed cleaned coal, etc.
Product Description

The single-drum dryer system is a new type of special drying equipment consisting of a heat source, a dispersing device, a belt feeder, a feeder, a rotary drum, a belt discharger, an induced draft fan, a discharger and a power distribution cabinet. It can be widely used in the drying of coal industry materials such as coal slime, raw coal, flotation clean coal, mixed clean coal; blast furnace slag, clay, bentonite, limestone, sand, quartz stone and other construction industry materials; various metal concentrates Drying of materials in the beneficiation industry such as mines, waste residues and tailings; and the drying of non-heat sensitive materials in the chemical industry.

Single drum dryer

Working Principle

The single-cylinder dryer is a high-efficiency horizontal dryer, adopts a new type of material lifting plate device, with multiple functions such as guidance, current sharing, and material lifting. The material can be uniformly distributed in the radial section of the dryer, and the material curtain becomes thin, uniform, and complete, fully contacting the hot air flow, and achieving the purpose of making full use of heat energy. The high-efficiency dryer optimizes the process system parameters and selects reasonable operating parameters, which solves the balance problem of the three major elements of the drying system "coal, material, and wind", thereby greatly improving the thermal efficiency of the dryer. Increase output and reduce energy consumption. Compared with general dryers, coal consumption and electricity consumption are reduced by more than 30-70%, and hourly output is increased by more than 50-85%. It has been widely used in cement companies.

Single drum dryer

 

Product Advantages

1) The use of a new combined material lifting plate and a central secondary lifting device makes the material no wind tunnel phenomenon and high heat exchange efficiency.
2) A variety of circumferential hoisting combination distribution, effective control of the drying time, and good drying effect.
3) The large gear ring and the cylinder adopt a set structure to ensure concentricity, and fully solve the problems of flexible board connection, difficult installation and debugging, poor concentricity, and unstable operation.
4) It is equipped with a high-temperature flue gas boiling furnace, which burns quickly, provides sufficient heat, and has high thermal efficiency. The coal consumption is less than 10kg standard coal/ton dry material.
5) Integrate the overall system of heating, drying, and dust collection to achieve mechanization and automation of operation and meet environmental protection requirements.
6) Simple structure, convenient maintenance and low maintenance cost.

Technical Parameter
Spec.(m)
Capacity(t/h)
Main motor
Main reducer
Weight(t)
Power(kw)
Model
Model
Speed ratio
 
Φ1.2×10
6-8
7.5
Y160M-6
ZL50-16-1
31.5
12.5
Φ1.5×12
8-12
15
Y180L-6
JZQ500-IlI-2F
31.5
16.5
Φ1.5×15
12-16
18.5
Y200L-6
JZQ500-Ill-2F
31.5
18
Φ1.8×12
18-20
18.5
Y200L-6
ZQ50-16ll-2
31.5
20
Φ2.2×12
22-28
22
Y160L-6
JZQ650-IlI
31.5
37.6
Φ2.2×14
26-30
22
Y160L-6
JZQ750-IlI
31.5
40
Φ2.4×14
30-35
30
Y250M-6
JzQ750-III
31.5
51
Φ2.4×18
35-40
37
Y250M-6
ZL85-13-1
27.16
54
Φ2.4×20
38-42
37
Y250M-6
ZL85-13-1
27.16
54.14
Φ2.8×20
43-50
45
Y280S-6
ZL85-13-1
27.16
71
Φ3x20
45-55
55
Y250M-4
ZL100-16-1
41.52
78
Φ3×25
58-70
75
YR280M-4
ZL100-16-1
41.52
93
Φ3.2×25
75-90
90
Y315M-6
ZSY315-22-ll
22.4
156
Φ3.6×25
95-110
160
Y355L1-4
ZSY500-35
35.5
170
Φ3.6×28
80-140
200
Y355L2-4
ZSY500-35
35.5
180

contact-us

The single-cylinder dryer consists of a cylinder as the main body of the dryer. The main body rotates horizontally on the four supporting wheels at both ends through the tyres at both ends. The feed end of the cylinder is equipped with hot air stove devices such as fuel oil, steam, and coal. The discharge end is equipped with a dust cover and an automatic unloading device. The dust cover is connected to the dust collector through the pipeline, and the dust removal equipment, feeding equipment and conveying equipment can be designed separately according to the user's process conditions and requirements.
LEAVE A MESSAGE
We hope to establish a business together with you and provide you with professional and comprehensive technical support.

Copyright All Rights Reserved(C)2021Power By XKJGROUP | 豫ICP备10018633号-23

Privacy Policy | Site Map
Home Products Contact Case About
online
Online
tel
+8613253332091
email
GROUPXKJ@gmail.com
backtop