Home / News /

Industry News

COMPANY NEWS INDUSTRY NEWS PRODUCT KNOWLEDGE

Specifications of the 1000x800 Hammer Crusher

2025.12.29

The 1000×800 hammer crusher is a medium-sized crushing equipment widely used in mining, building materials, metallurgy, and chemical industries. It is primarily used for coarse and medium crushing of materials with medium hardness. The "1000×800" in the model number represents the rotor diameter (1000 mm) and length (800 mm), which are important indicators of the equipment's processing capacity. This crusher mainly consists of a casing, rotor, hammers, screen plates, and a t...

Product Knowledge

Recommended ball mill model: Finished product reaches 20 mesh, with an hourly output of 3 tons.

2025.12.27

In the powder processing industry, ball mills are common grinding equipment, widely used in mining, building materials, and chemical industries. If a user requires a processing capacity of 3 tons per hour and a finished particle size of 20 mesh (approximately 850 micrometers), a suitable model balancing capacity and particle size control must be selected. 20 mesh is considered a relatively coarse particle size, and the requirement for fine grinding is not high. Therefore, short-cylinder...

Product Knowledge

What are the different types of discharge outlets for ball mills?

2025.12.25

Ball mills are widely used grinding equipment in mining, cement, chemical, and other industries. The discharge method directly affects grinding efficiency and product particle size. Based on their structure and working principle, ball mill discharge ports are mainly divided into three types: overflow type, grate type, and peripheral discharge type. Overflow discharge is the most common type. After the material is ground to a sufficient fineness inside the cylinder, it flows natura...

1 2 3 4 5 6 7 8...21