Home / News / Product Knowledge /

How are the coarse grinding process and the final grinding fineness determined for a ball mill?

How are the coarse grinding process and the final grinding fineness determined for a ball mill?

2026.11.19

6

Back to list

Grinding fineness is one of the most critical parameters in any grinding operation. If the fineness is insufficient, valuable minerals will not be adequately liberated from the gangue, leading to poor recovery rates in subsequent processes such as flotation, gravity separation, or leaching. Conversely, excessive grinding (over-grinding) results in the formation of slimes, over-pulverization, and the unnecessary waste of energy and chemical reagents. Therefore, the target grinding fineness—often expressed in terms of mesh size—should not be determined based on mere guesswork or experience; rather, it must be established through rigorous testing.
Once the optimal fineness is determined, two other process strategies warrant consideration: "coarse grinding with pre-discarding of tailings" (pre-concentration) and "staged grinding." Both methods help reduce the total volume of material requiring fine grinding—while still ensuring proper mineral liberation—thereby effectively lowering overall grinding costs. In this article, Xingkuang Machinery explains how to determine the optimal grinding fineness and outlines the specific scenarios where these two process strategies are most applicable.

球磨机03
I. How to Determine Grinding Fineness
Determining grinding fineness is essentially about finding the optimal balance between the "degree of mineral liberation" and "grinding costs." This is achieved through "fineness-versus-recovery" testing: ore samples are ground to various degrees of fineness (e.g., achieving 55%, 65%, 75%, or 85% passing a 200-mesh screen) and then subjected to separation or leaching tests. The results are used to plot a curve showing how the recovery rate changes in relation to grinding fineness.
Typically, this curve follows a specific pattern: as fineness increases, the recovery rate rises rapidly at first, then levels off. If grinding continues beyond this point, the recovery rate may even decline slightly due to over-grinding. The optimal fineness is generally found near the "inflection point"—where the recovery rate begins to plateau, but before over-grinding occurs. Similar to the process of optimizing flotation or leaching conditions, this approach relies strictly on empirical data.
II. Coarse Grinding with Pre-discarding of Tailings: Removing the "Useless" Material First
"Coarse grinding with pre-discarding of tailings" involves grinding the ore to a relatively coarse size and then using gravity separation, magnetic separation, or flotation to remove gangue or low-grade material. Only the portion containing the target minerals proceeds to the fine-grinding stage. The logic is simple: there is no need to grind a large volume of gangue to a fine state; by removing it early, the total amount of material requiring subsequent fine grinding and separation is significantly reduced.
This approach is particularly well-suited for ores where the target minerals are relatively coarse-grained and the gangue content is high. For instance, in certain silver-copper or lead-zinc deposits, minerals such as galena and various silver-bearing species can be liberated at relatively coarse particle sizes, allowing for the early rejection of a significant portion of gangue minerals like quartz and calcite. This substantially reduces the volume of material requiring fine grinding, thereby lowering both energy consumption and reagent usage.
The key to rejecting tailings at a coarse grinding stage lies in ensuring that the rejection is both effective and accurate. If tailings are rejected too early, target minerals—not yet liberated—may be lost; conversely, if rejection occurs too late, the objective of reducing the processing volume is defeated. The optimal particle size and method for tailings rejection should be determined through experimental testing.

球磨机62
III. Staged Grinding: Grinding to the Appropriate Fineness
Staged grinding involves dividing the grinding and beneficiation processes into two or more stages: an initial coarse grind is used to recover a portion of the concentrate or reject some tailings, followed by a fine grind of the remaining material for further beneficiation. The underlying logic is that since the minerals within an ore are not uniformly disseminated, there is no need for a "one-size-fits-all" approach that grinds everything to the finest possible size.
The advantage of staged grinding is that it allows for grinding to the appropriate fineness: minerals that have already been liberated at a coarser size are recovered promptly, preventing over-grinding, while material that remains unliberated undergoes targeted fine grinding. Compared to a "single-stage fine grind" approach, staged grinding minimizes over-pulverization and reduces energy consumption, often resulting in a higher overall recovery rate.

Coarse grinding followed by regrinding, as well as staged grinding, are effective methods for reducing grinding costs; they minimize unnecessary grinding while still ensuring adequate mineral liberation.
LEAVE A MESSAGE
We hope to establish a business together with you and provide you with professional and comprehensive technical support.

Copyright All Rights Reserved(C)2021Power By XKJGROUP | 豫ICP备10018633号-23

Privacy Policy | Site Map
Home Products Contact Case About
online
Online
tel
+86 0371-65091987
email
GROUPXKJ@gmail.com
backtop