Regarding specifications, the shell diameter of a 10-ton class copper ore ball mill usually falls between 1.5 and 2.1 meters, with a length of about 3 to 4.5 meters. Motor power typically ranges from 75 kW to 245 kW, maintaining a stable rotation speed of 20 to 30 rpm. Feed particle size is generally required to be under 25 mm, while discharge fineness can be flexibly adjusted between 0.074 mm and 0.4 mm to meet downstream processing requirements.

​

In terms of model recommendations, for wet grate-discharge operations, models with shell specifications of 1830×3000 or 1830×3600 are suitable; these offer a throughput capacity of 10 tons per hour and rapid discharge, making them ideal for coarse grinding. If a finer discharge particle size is required, overflow-type ball mills such as the 1830×4500 or 2100×3000 models are recommended; these feature a higher length-to-diameter ratio, allowing for extended grinding time and ensuring sufficient copper ore dissociation.

Additionally, factors such as ore hardness, moisture content, and site conditions must be considered during selection. Proper parameter matching and model selection not only improve copper recovery rates but also effectively reduce energy consumption and the costs associated with steel ball and liner wear, thereby maximizing economic benefits.