BS-K type flotation machine main shaft hanging on the side of the frame, bearing body structure lightweight, easy installation, good vertical , the impeller section is conical and the stator is radial, Low wear, long life, strong stirring. "U" shaped tank reduces the deposit at the bottom of the tank, the main shaft parts are light, The stator is mounted on the bottom of the tank, easy to install. Small power and saving energy; Filled with compressed air, the bubble dispersed evenly, foam stability, particle suspension is good, the recovery rate is above 2%.

The product is divided into single tank, double slot, three tank, the four tank, the five tank, the six tank and other units.

The working principle of flotation cell: The mineral pulp being added pharmacy will be passed into the gas, and the electric rotor will bring the movement of part pieces to mix and stir in order to make the mineral and gas be sufficiently mixed, and at this minute, the grain of mineral pulp is above on the bubble, floating on the surface, which can reach the purpose of sorting the mineral material through blade scrapings.

1. Air charging system is mainly composed by the inlet air pipe;
2. The flotation machine has large inhaling capacity and low energy consumption;
3. Complete flotation circuit with inhaling air and pulp, no auxiliaries are needed;
4. Reasonable circulation of pulp decreases coarse sand sedimentation.

Email: GROUPXKJ@gmail.com
WhatsApp: +8616691620066